Lower / Upper tissue paper feeding unit Baby Diaper Production Line
/ Diaper Manufacturing Machine
Main Features
1. Lower tissue paper feeding unit
1) Double air expansion axles material shelf has A,B shafts, can
unwind the materials by servo motor independently. The unwinding
speed is controlled by constant tension controller.
2) Cutting and splicing device adopts shearing style.
3) Zero speed reduce splicing device, auto reject the defects.
4) Material detection, auto alarm and stop the machine once
material run out.
5) Auto reject the defects with raw material joint
6) Web guider rectify the material direction automatically
7) Size of material: width 150-260mm, diameter ≤1000mm,roll center
diameter 3 inches.
2. Upper tissue paper feeding unit
1) Double air expansion axles material shelf has A,B shafts, can
unwind the materials by servo motor independently. The unwinding
speed is controlled by constant tension controller.
2) Cutting and splicing device adopts shearing style.
3) Zero speed reduce splicing device, auto reject the defects.
4) Material detection, auto alarm and stop the machine once
material run out.
5) Auto reject the defects with raw material joint
6) Web guider rectify the material direction automatically
7) Size of material: width 80mm, diameter ≤800mm,roll center
diameter 3 inches.
Main Technical Parameter
1. Designed speed:600pcs/min
2. Stable production speed:500pcs/min(M size)
3. Centre distance: 300mm
4. Raw material layout: Absorption sheet on top and laminated film
on bottom.
5. Tolerance of diaper weight: ±1.5g
6. Qualified rate:≥97%(excluding defectives from hot-melts and
spliced)
7. Efficiency:≥85%
8. Power:380V/50HZ,Tri-phase four wires + earth wire
9. Machine power:300KW Approximately(excluding hot melt adhesive
machine and air compressor)
10. Air pressure:1000 liter/min,6~8BAR
11. Machine space : 40 m×9 m×4 m (For reference only)
12. Weight: 75 Tons Approximately
13. Machine direction:defined by customer.
14. Machine color: As per customer request.
Main parts supplier
| Name | Brand |
| PLC | MITSUBISHI |
| Touch screen | MITSUBISHI |
| Web guider | BST |
| Opto-electric switch | Sick |
| Temperature control meter | Schneider |
| Low voltage electric | Schneider |
| Solid state relay | FOTEK |
| Pneumatic parts, valve and cylinder | AIRTAC |
| Key bearings | NSK&NTN |
| Timing belts | GATES |
| Flat belts | Esbelt-Spanish |
| Main roller (T15) | China |
| Servo Motor | Mitsubishi-Japan |
After-sales service
1. Provide complete mechanical instruction in English and Chinese
2. Training how to install the machine, training how to use the
machine.
3. Engineers available to service machinery overseas.
You are welcome to make an enquiry with us.
Contact me, get the latest design and best price!
